Fuse Box

Fuse box isn’t working properly (doesn’t trigger with fuses inserted or via dashboard)

Check that the red/black wires above and below the fuse holders and see if they're still attached
If they're not attached: Use a flat head screwdriver to unscrew the screw below the fuse holder (see the other wires to find the right one). If the wire was ripped out, use the stripper tool to strip the wire. Take the wire that fell out and put it back behind the screw. Tighten the screw back down and re-test the fuse box.

If they are attached and still not working, read the next topic in this article.

If you’ve checked the above issue (red and black wires) and that’s not it, then you should check your Debug menu on the dashboard
If the INPUT or OUTPUT (aka I/O) are offline, you will need to reset them via the hallway panel. Opening the hall panel, you should see two boxes labeled INPUT and OUTPUT. There is a small cable that is able to be unplugged. That is what you will unplug to reset the I/O.
NOTE: Resetting the INPUT will not affect anything during gameplay, HOWEVER, the OUTPUT will open up any maglocks in the room when reset.

If this doesn’t work, contact Tech Support via Discord and they can help