# of Signs per Store:

• 1 Sign - Columbus, Marlborough, Plano, Westchester, Charlotte, Milwaukee, Minneapolis, Nashville, Pittsburgh, Woburn, Hyde Park, Jacksonville, Columbia, Knoxville, OKC, St. Louis, Timonium, Chattanooga, Dayton

• 2 Signs (11”x17”) - Orange Beach, Gatlinburg, Virginia Beach, Atlanta, Indy, Asheville, Greensboro

• 2 Signs (One 11”x17”, One 8.5”x11”) - Des Moines, Birmingham, Louisville

• 3 Signs (Two 11”x17”, One 8.5”x11”) - Lexington

Game Master Tip Board Sign Ordering

1. Download the Tip Board file(s) for your store. Some have more than one, so please make sure you get them all. The files can be found by clicking here.

2. Go to https://www.vistaprint.com/ and navigate to the “Foam Board” page via the menu OR go directly there with this link: https://www.vistaprint.com/signs-posters/foam-board-signs

3. For the settings, you’ll want to choose the following:
   

4. Size - 11”x17”

5. Shape - Rectangle/square

6. Orientation - Vertical

7. Quantity - Select however many tip boards you have. Note: Some stores have two 11x17 boards, some have one 11x17 and one 8.5x11. We are only printing the 11x17 boards with this process. See at top of page what sizes you have.

4. Then select “UPLOAD DESIGN”

5. On the next screen you’ll see a popup that allows you to select your file. Click on “UPLOAD FROM THIS DEVICE” and select your Photo Board PDF.
   

6. When you get to the editing screen, ensure the file uploaded correctly. You won’t need to click on anything but “NEXT” in the upper right hand corner.
   

7. On the next screen, click the checkbox and then CONTINUE
   

8. The website will try to show you “Related Items” to purchase. Just click on CONTINUE in the bottom right corner until you’re taken to the cart.

9. Check out! 

IF YOUR STORE HAS AN 8.5x11 FILE, FOLLOW THESE INSTRUCTIONS:

**These are not being printed on foam board but instead just laminated poster**

1. Download the appropriate file

2. Go to https://www.vistaprint.com/ and navigate to the “Posters” page via the menu OR go directly there with this link: https://www.vistaprint.com/signs-posters/posters

3. For the settings, you’ll want to choose the following:
   

4. Orientation - Vertical

5. Size - 8.5”x11”

6. Paper Stock - Semi-Gloss

7. Lamination - Lamination

8. Quantity - 1

4. Follow the same instructions as the above. The process should be the same!

Name Plate Instructions (**PRINTED AT YOUR STORE**)

1. Visit the Canva link here: https://www.canva.com/design/DAGgOVULE6w/UzXeM5jr3NrP1VFMov1lwg/view?utm_content=DAGgOVULE6w&utm_campaign=designshare&utm_medium=link&utm_source=publishsharelink&mode=preview

2. Follow the instructions on the first page of the template. Make sure you laminate your name plates to ensure durability.

3. When attaching these to your tip board, we recommend some light velcro or even light duty peel and stick magnet strips (you likely have both).